The Irinos-Box IR-DIO provides 16 digital inputs and 16 digital outputs. Three types are available:
oWith 4 connectors M23 for the connection of external connection modules. The supply for the in- and outputs must be supplied via a M12 connector.
oWith 4 connectors M23 for the connection of external connection modules. The supply for the in- and outputs is taken from the ILink supply power (for low power applications).
oWith one connector DSUB 37-pin for direct connection.
Via an adapter module (828-5021), the in- and outputs can be accessed via terminal blocks.
The definition of the type string is as follows:
Connectors for "IR-DIO-16-16-M23-EXTP-IL"
Connectors for "IR-DIO-16-16-D37M-EXTP-IL"
Connectors for "IR-DIO-16-16-D37M-EXTP-IL" with terminal block adapter
Connectors / elements
o16 digital in- and outputs via M23 or DSUB37.
o24V power supply for the digital in- and outputs via M12.
oAn explanation of the communication section can be found in the general overview.
Power supply
Depending on the type of the Irinos-Box IR-DIO, digital in- and outputs must be supplied by an external power supply. Using the M23 type, this is done via an M12 connector. Using the DSUB type, the supply is directly connected to the DSUB connector.
A blue LED is turned on, if the 24V power supply is available.
A power supply of the protection class PELV must be used.
Note: It is possible to use 12V DC for the power supply. In this case the status LED is turned off. All in- and output-LEDs have a low brightness. The switching characteristics remain unaffected.
Protection
All outputs are individually protected against short circuit. Additionally the internal output circuit is protected against thermal overload. The available output power is specified in the data sheet.